...

5V vs 7.4V vs 12V Heated Jackets: What Buyers Should Compare

M61/M62 jacket USB-A connector, tethered cap and zippered inner pocket in a landscape detail illustration.

M61/M62 USB-A connector and inner pocket, shown in a detail illustration.

Before choosing a voltage for a heated jacket collection, decide how the customer will use the garment. Will they carry a battery in a pocket? Do they already own a power bank? Are you developing clothing intended to connect to a motorcycle?

Those questions help define the product you need to source. The voltage is one part of that specification, alongside the garment, heating elements, controller, power source and accessories.

For brands and importers comparing 5V, 7.4V and 12V heated jackets, a useful decision comes from reviewing the complete configuration and its test results. A larger voltage number alone does not establish a warmer jacket or a longer runtime.

Separate voltage, power and battery energy

Three different measurements can appear in a supplier’s quotation:

  • Voltage, in volts (V): identify the garment’s required input and the power source’s specified output.
  • Power, in watts (W): the rate at which the garment uses electrical energy.
  • Battery energy, in watt-hours (Wh): the energy rating of the battery, distinct from the garment’s power consumption.

Keeping those fields separate makes a comparison more useful. OpenStax’s explanation of electrical power provides the relationship between voltage, current and power.

Ask for the garment’s actual input power

At a steady DC operating point:

Power (W) = voltage (V) × actual current (A).

The current matters. Request the garment’s input power at the relevant heat setting; the maximum output printed on a power bank is not a measurement of what the jacket actually draws.

Temperature needs its own evidence. Heat transfer depends on factors including materials, geometry and temperature differences, as explained in OpenStax’s heat-transfer chapter. For a garment comparison, that means reviewing the heating layout, insulation, control settings and test environment alongside electrical input.

Ask where a quoted temperature was measured. A heating-element reading, a lining-surface reading and a wearer-comfort claim describe different things.

What to check for each voltage option

Use the following table to organize a supplier discussion. It lists purchasing questions, rather than assigning a universal performance ranking.

5V, 7.4V and 12V heated jackets: questions for suppliers
Option being proposedFirst question to resolveInformation to request
5V heated jacketWhich power source and output port are approved for this garment?Required input, current demand, connector, cable and any applicable USB power requirements
7.4V heated jacketDoes the number refer to the battery’s nominal rating, and which complete battery system matches the jacket?Garment input range, battery model, controller, connector details and matched charging equipment
12V heated jacketIs the product intended for a portable battery or a vehicle-powered arrangement?Approved power source, input requirements, controller and any required connection hardware

5V: define the power bank and connection

For a USB-powered 5V heated jacket, “uses a power bank” is an incomplete specification.

Ask for the approved power-bank model or a clearly defined set of compatible output requirements. Identify the output port and cable used during sample testing. Keep the battery’s charging input separate from the output that powers the garment.

USB-C describes a connector system; the power arrangement still needs to be established. The USB-IF’s Power Delivery overview explains how power delivery can involve different voltage and power capabilities and device negotiation. For buyers, the practical consequence is to verify the complete connection instead of relying on the connector’s appearance.

If you plan to sell the jacket without a power bank, agree on the compatibility information that customers will receive.

7.4V: read the battery specifications carefully

A nominal battery rating and a charging specification are different fields.

For example, the published technical data for Tenergy’s 31007 battery module lists a nominal voltage of 7.4V and a charge cutoff of 8.4V. That is a specific battery example, not a universal specification for every 7.4V heated jacket or an Everlanda battery recommendation. Confirm the current data sheet for the battery being quoted.

For the product you are sourcing, request the jacket’s accepted input range and the exact battery, controller and charging equipment proposed by the supplier. Record the connector specification and wiring arrangement as part of the matched configuration.

If you want one battery to serve several garments, name each garment model and ask the supplier to confirm that combination.

12V: distinguish portable power from motorcycle power

A 12V heated motorcycle jacket can be part of a vehicle-powered system. For example, Gerbing’s official 12V instructions describe motorcycle-battery power with the brand’s required harness and temperature controller.

That example illustrates why the power source belongs in the product brief. A vehicle-powered arrangement and a jacket using a battery carried by the wearer have different supply arrangements. A description of operation while connected to a motorcycle is not a single-charge runtime figure for a portable battery.

Ask which arrangement the supplier is quoting. If your customer needs to use the garment away from a vehicle, make that requirement explicit and request an approved solution for that use.

Compare heated jacket batteries in Wh, not mAh alone

Milliamp-hours measure charge capacity. To compare nominal battery energy, you also need the voltage associated with that capacity.

Nominal energy (Wh) ≈ nominal voltage (V) × capacity (mAh) ÷ 1,000.

The FAA explains this conversion in its battery guidance. Here it is used only to explain the energy calculation.

Consider two hypothetical battery labels:

Hypothetical battery labels: two examples with the same nominal energy
Label informationNominal energy calculation
10,000mAh at 3.7V10 × 3.7 = 37Wh
5,000mAh at 7.4V5 × 7.4 = 37Wh

They describe the same nominal energy, despite different mAh figures. They do not establish interchangeable batteries or identical jacket runtime.

Check which voltage the capacity label uses. Anker’s explanation of power-bank capacity distinguishes internal-cell capacity from output capacity and explains conversion losses. Do not multiply an internal-cell mAh figure by a USB output voltage unless the manufacturer specifies that capacity at that output.

Request the battery’s Wh rating and the output information for the actual configuration being offered.

Ask for runtime results under stated conditions

The basic energy relationship gives:

Approximate runtime (hours) = usable energy delivered to the garment (Wh) ÷ average garment input power (W).

This is a planning calculation. Use energy and power measured at the same point in the system, and distinguish usable delivered energy from the battery’s nominal label rating. The underlying relationship is energy equals power multiplied by time.

For purchasing and product-page claims, ask for a runtime record for the exact garment and power source. It should identify:

  • The jacket model, heating configuration and battery model.
  • The heat setting and any changes in setting during the test.
  • The starting battery condition and ambient conditions.
  • The elapsed operating time and what counted as the end of the test.
  • The temperature measurements, if a temperature claim accompanies the runtime.

Compare like conditions. A low-setting result for one configuration and a high-setting result for another do not answer the same buying question.

If the supplier changes the battery or controller after sampling, ask which results still apply and which need to be checked again.

Decide whether to sell a complete kit or the garment alone

Your retail package is a separate decision from the voltage label.

For a complete kit, identify the garment, battery, charging equipment, instructions and packaging included in the quotation. Agree how replacement batteries and accessories will be identified for customers.

For a garment-only offer, establish the approved power requirements and how a buyer will select a compatible power source. Avoid leaving that decision to a vague instruction such as “use a suitable battery.”

If you intend to offer jackets, vests and spare batteries under one brand, prepare a model compatibility list. Have the supplier review it before describing a battery as shared across the collection.

For an OEM heated jacket project, this decision should be part of the sample brief. It affects what you need to review as a complete saleable product.

Compare the cost of the proposed configurations

Ask for separate prices for the garment and heating assembly, controller, battery, charging equipment and packaging. Keep quantities, fabric, fit and branding consistent where you are trying to isolate the effect of a power-system change.

This gives you a clearer commercial comparison than sorting quotations by voltage. Request explanations for any different accessories or development work included in one option.

Bring the physical sample into the decision as well. Review battery-pocket access, the position of the controller, cable routing and how the supplied accessories fit into the intended package. Record what needs changing before comparing the revised offers.

A practical first-order decision is the configuration that meets your brief, has evidence for its claimed performance and can be quoted with its supplied parts clearly identified.

Frequently asked questions

Can the same battery work with both a heated jacket and a heated vest?

Only treat it as a shared battery after the supplier has confirmed the named garment models and complete power configuration. Matching voltage labels or similar-looking plugs are not enough information to approve that claim. Request a written compatibility list for the products you intend to sell together.

Can a higher-voltage battery upgrade a lower-voltage jacket?

Do not use a higher-voltage battery as an improvised upgrade. Operate the garment with its specified power system. A proposed voltage change needs review of the heating elements, controller, wiring, connections and protection arrangement by the supplier’s technical team, followed by appropriate validation of the revised design.

What voltage do the M61/M62 heated fleece jackets use?

The documented M61/M62 reference specification lists 5V USB power, with a USB-A connector shown in the supplied detail image. Ask Everlanda to confirm the matched power-bank model and output requirements, connection and supplied accessories for your order.

Discuss your heated apparel requirements with Everlanda

Start with the intended wearer, garment style and how the product will be powered. Include your preferred configuration, battery inclusion, target runtime, quantity and market. Mark performance figures as requirements to be evaluated, rather than assuming a voltage will deliver them.

If you are considering our M61 and M62 heated fleece jackets, identify the model and ask for its matched power package. For other proposed configurations, send the details for review.

Use our heated jacket RFQ checklist to organize your first brief. For quantity, sampling and scheduling questions, see Custom Heated Jackets: MOQ, Samples and Lead Times.

Send your brief to Everlanda so we can review your requirements and confirm whether we can support the project.

Discuss Your Heated Apparel Configuration

Sources

TALK TO OUR TEAM

Doya Zeng

Your Jacket Sourcing Partner

Discuss jacket development, material selection and OEM/ODM requirements with Everlanda.

OUR FOCUSMen’s Jackets
Functional & Outdoor Apparel
OEM / ODM Development

We will contact you within 1 working day. You can also reach us directly at doya.zeng@everlanda.com.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.