PRIVATE LABEL & BULK SOURCING
A short-sleeve hooded fan jacket with work pockets and fan mounting positions at the lower back. Match the garment with an agreed fan and power configuration, and review the fit and supplied components on a sample.
Discuss the illustrated product, sample requirements and proposed changes. Supply scope and order terms are confirmed in your quotation.
START WITH THIS PRODUCT
Review the garment and visible construction first. Share your intended use, clothing layers, quantity and required configuration when requesting a sample.
Yellow · appearance reference
The table identifies the referenced garment and configuration. Confirm production specifications and the itemised supply scope on the approved sample.
| Review area | For this product |
|---|---|
| Garment | Short-sleeve hooded zip-front jacket; not a sleeveless vest |
| Ventilation | Lower-back fan mounting design; confirm the fans supplied for the selected configuration |
| Material reference | Polyester; confirm the actual fabric composition and specification |
| Visible details | Hood, front zip and multiple work pockets |
| Pictured color | Yellow; confirm the final order color and garment details |
| Kit scope | Garment, fans, controller, cables and power source identified separately in the quotation |
Fans fitted at the lower back move air into the space inside the jacket. Airflow depends on the garment fit, clothing layers and the selected fan and power configuration.
This is fan-assisted garment ventilation. Confirm the fan, mounting dimensions, connector, controller and power requirements on a sample before ordering.

PREPARATION & USE
The illustration shows wearing and fit only. Review the hood, sleeves and hem over your intended base layer; use the complete instructions supplied for the selected fan kit for installation and operation.
Specify the garment and any separate components, instructions, branding or packaging in one enquiry. Record each item and quantity in the agreed quotation.
| Item | Reference or enquiry item | Confirm in your quote |
|---|---|---|
| Garment | Short-sleeve hooded jacket with lower-back mounting positions | Confirm the garment color, size mix and mounting construction |
| Fans | Rear fan assemblies are illustrated | Confirm quantity, dimensions, fixing method and whether fans are included |
| Controller and cables | Must match the selected fan configuration | Confirm settings, connectors, cable routing and items supplied |
| Power source | Must match the agreed fan and controller requirements | Confirm electrical specification, compatible source and whether it is included |
Compare the approved sample, itemised quotation and packing list. Confirm the product version, materials, measurements and any requested accessories before order approval.
Review the garment, cooling or heating components and matched power arrangement together. Confirm connector, voltage, controller, cables and the supplied parts list before operating a sample.
Operating settings and runtime apply only to the stated configuration and test conditions.
List components supplied with the garment separately from optional or buyer-supplied equipment.
Review the fabric, hood, closures, work pockets and rear mounting area together. The material reference is polyester; confirm the actual garment specification and matched components on the sample.
| Material or construction | Sample and order review |
|---|---|
| Fabric | Polyester reference; final composition and fabric specification to be confirmed |
| Hood and short sleeves | Check the hood, sleeve opening and movement on the sample |
| Rear mounting area | Confirm hole dimensions, fixing arrangement and compatibility with the selected fans |
| Work pockets | Check access and closure; do not assume an electrical battery pocket from the outer pocket image |
Approve the material specification, colour, sample construction and care requirements in writing. Review changes against the agreed sample before production.
Review the fan fixing arrangement and the access needed for installation. Confirm the actual fan quantity, mounting dimensions and compatible parts on the sample.
The edited reference shows the outer work pockets. Review access and closures against the intended use; an outer pocket image does not establish battery size or cable routing.
Record the approved construction, closure operation, stitching and component checks in the sample and inspection checklist.
For proposed construction changes, agree materials, sample acceptance, quantities, costs and timing. Coordinate any care-label and packaging changes with the final specification.
Choose the size mix from the actual garment measurement sheet. Review the fit over the intended base layer and repeat the movement check with the agreed fan kit fitted.
| Sizing decision | Confirm for your order |
|---|---|
| Chest and body length | Compare garment measurements with the intended clothing layers |
| Sleeve and hood fit | Check comfort and movement in the short-sleeve design |
| Rear fan clearance | Review movement and mounting comfort with the agreed fans fitted |
| Power-source placement | Confirm the supported power-source position and cable routing for the selected kit |
Review the intended clothing layers. Compare garment measurements, movement and closure fit on the approved sample before choosing the order size mix.
Agree garment measurements, fabric identification, stitching and pocket checks with the fan mounting, connectors, cable routing and electrical operating checks that apply to the selected configuration. Record the agreed fan and power specifications for inspection and future replacement enquiries.
MATCH EVIDENCE TO THE CONFIGURATION
Agree garment measurements, fabric identification, stitching and pocket checks with the fan mounting, connectors, cable routing and electrical operating checks that apply to the selected configuration. Record the agreed fan and power specifications for inspection and future replacement enquiries.
Review the method, configuration, measured result and conditions before using a performance figure in the product specification.
Share your logo artwork, preferred position and requirements for labels, hangtags, instructions and packaging. EVERLANDA coordinates sample review and the quotation scope with the selected supplier.
For a private-label enquiry, review the decoration method and position against the actual material and garment construction. Confirm feasibility and the sample result before approval.
| Decision | What to establish |
|---|---|
| Base product | Approve the garment, configuration and proposed artwork position. |
| Requested changes | Discuss logo, labels, materials, pattern or packaging. Each change requires supplier and sample review. |
| Quote and sample approval | Agree the scope, sample costs, minimum order, timing and bulk terms in writing. |
The photographs below are general garment workshop and packing references. EVERLANDA coordinates the approved sample, product specification and order requirements with the selected supplier. They do not document production or testing of this particular product.
Six views of general garment production, from fabric preparation to garment handling and the overall workflow.
Use the approved sample and written configuration as the order reference.
A look at general garment workshop facilities and equipment.
Use the itemized quotation and packing list to agree the packing details for your configuration.
Archived packing and dispatch examples from general garment orders.
Product-specific documentation reserved pending applicable evidence.
Agree a written sample approval and inspection plan with our procurement coordination team. Confirm the scope, any third-party involvement and fees for your order.
Confirm the approved sample, materials, garment measurements, configuration and itemised supply list.
Record production requirements and confirm any changes to the approved sample.
Review appearance, measurements, closures, seams, components and the agreed functional checks.
Check agreed components, garment labels, packaging and the packing list.
| Inspection scope | Items to agree |
|---|---|
| Garment | Compare dimensions, materials, colour, closures and finish against the approved sample. |
| Configuration and function | Check the identified components and agreed preparation or operating method, where applicable. |
| Complete order | Compare item counts, size mix, labels, instructions and packing against the written quotation. |
PRODUCT CARE
Obtain the garment care label and the selected fan kit’s shutdown and removal instructions before cleaning. The fan, controller, cables and power source require their own handling guidance.
For replacement enquiries, identify the fan, mounting size, connector, controller and power-source specification from the agreed component list.
Confirm compatible replacement components and the service conditions in your order; do not assume that a different fan or power source will fit.
Fans fitted at the lower back move air into the space inside the garment. The amount and path of airflow depend on the fit, clothing layers and matched fan and power configuration.
Do not assume either is included. The quotation should list the garment, fan quantity, controller, cables and power source separately.
The electrical specification and connector must match the selected fans and controller. Confirm the complete configuration before choosing a battery or power bank.
Settings have not been confirmed for the selected kit. Request the matched controller specification and operating instructions with the sample.
No fixed runtime is stated. Any runtime result should identify the actual fan configuration, power source, setting and test conditions.
Confirm the fixing and removal method for the selected fans, then follow the garment care label and the component handling instructions. No machine-wash method is assumed here.
Send the artwork, proposed location, garment quantities and packing requirements. Confirm the method and sample without obstructing the mounting area or intended airflow.
A yellow color does not establish a protective clothing certification. Any required visibility class or other standard must be checked against documentation for the selected garment.
Tell us your intended use, approximate quantity, sample needs and proposed branding or configuration changes. Include the required size mix and target market if available.
You can begin with a sample or project enquiry even if some details are still undecided.
EVERLANDA will discuss the selected product, sample evaluation, specification and quotation scope with you. Availability, minimum order, costs and timing are confirmed for the selected order.
| Purchasing topic | What your enquiry can cover |
|---|---|
| Samples and quantities | Discuss evaluation samples, required sizes and the estimated quantity for your wholesale enquiry. |
| Timing and logistics | Agree sample and bulk timing, packing and delivery terms for the confirmed configuration. |
| Quotation scope | Identify the garment, components, artwork, instructions and packaging separately. |
Procurement Coordination & OEM / ODM Project Support
Share a few details to request a quote or sample.
Short-Sleeve Hooded Fan Jacket · Enquiry reference SP-04
Your details are used to respond to this enquiry. Privacy Policy.
EVERLANDA · Procurement coordination & OEM / ODM support
Home / Products / About / Contact / Privacy Policy
Share a few details to request a quote or sample.
Short-Sleeve Hooded Fan Jacket · Enquiry reference SP-04
Privacy Policy · doya.zeng@everlanda.com
We will contact you within 1 working day. You can also reach us directly at doya.zeng@everlanda.com.