PRIVATE LABEL & BULK SOURCING
This heated motorcycle jacket is a thin liner for use as a mid-layer beneath a suitable outer garment. The reference configuration uses 12V vehicle power, with heating coverage described across the chest, back, sleeves and collar.
Discuss the illustrated product, sample requirements and proposed changes. Supply scope and order terms are confirmed in your quotation.
START WITH THIS PRODUCT
Review the garment and visible construction first. Share your intended use, clothing layers, quantity and required configuration when requesting a sample.
Black · appearance reference
The table identifies the referenced garment and configuration. Confirm production specifications and the itemised supply scope on the approved sample.
| Review area | For this product |
|---|---|
| Product format | Long-sleeve heated motorcycle jacket liner / mid-layer |
| Power reference | 12V vehicle power; confirm the matched input harness and connector |
| Heating coverage | Source-described six-zone coverage across chest, back, sleeves and collar |
| Control | Built-in hem button with three heat levels |
| Cuff connection | DC output for compatible heated gloves; glove supply is confirmed separately |
| Fabric reference | Nylon / spandex; composition proportions to confirm |
| Size labels | XS, S, M, L, XL, 2XL and 3XL; garment measurements to confirm |
The reference uses electrical heating supplied from a matched 12V vehicle-power configuration. It is worn as a mid-layer rather than as a protective motorcycle outer shell. The source describes heat coverage at the chest, back, sleeves and collar.
Heating graphics illustrate coverage. They are not a temperature test or an exact wiring layout. Confirm the input harness, electrical ratings and operating instructions for the supplied configuration.

PREPARATION & USE
Use the illustration to identify the liner, its intended layering position and the hem control. Confirm the complete connection and operating instructions for the matched supply before use.
Specify the garment and any separate components, instructions, branding or packaging in one enquiry. Record each item and quantity in the agreed quotation.
| Item | Reference or enquiry item | Confirm in your quote |
|---|---|---|
| Garment | Reference heated liner with hem control | Confirm the approved sample, size mix and heating configuration |
| Power connection | 12V vehicle-power reference | Confirm the vehicle-side harness, input plug and electrical ratings |
| Heated-glove connection | Sleeve-end DC outputs in the reference | Confirm compatible gloves, combined load and whether gloves are supplied |
| Documentation | Configuration-specific operating instructions | Request connection, control, care and inspection documents |
Compare the approved sample, itemised quotation and packing list. Confirm the product version, materials, measurements and any requested accessories before order approval.
Review the garment, cooling or heating components and matched power arrangement together. Confirm connector, voltage, controller, cables and the supplied parts list before operating a sample.
Operating settings and runtime apply only to the stated configuration and test conditions.
List components supplied with the garment separately from optional or buyer-supplied equipment.
The source lists nylon / spandex and shows a thin liner with a stand collar, ribbed cuffs and hem. Confirm fabric composition, lining construction and decoration placement on the approved sample.
| Material or construction | Sample and order review |
|---|---|
| Fabric | Nylon / spandex; percentages not supplied |
| Layering format | Thin heated liner for use beneath a suitable outer garment |
| Closure and trim | Front zip, stand collar, ribbed cuffs and hem |
| Decoration planning | Discuss logo, labels and packaging against the approved sample and heating layout |
Approve the material specification, colour, sample construction and care requirements in writing. Review changes against the agreed sample before production.
The reference places a single control button at the hem and describes three heat levels. Confirm the indicator colours, button sequence and operating conditions for the supplied configuration.
The sleeve-end connectors are described as outputs for heated gloves. Confirm the matching connector, electrical load and glove compatibility; these cuff outputs do not identify the vehicle-side power input.
Record the approved construction, closure operation, stitching and component checks in the sample and inspection checklist.
For proposed construction changes, agree materials, sample acceptance, quantities, costs and timing. Coordinate any care-label and packaging changes with the final specification.
Use the source size labels to discuss a sample size, then compare actual garment measurements with the wearer and intended outer layers. A numerical measurement chart is still required.
| Sizing decision | Confirm for your order |
|---|---|
| Size labels in the reference | XS / S / M / L / XL / 2XL / 3XL |
| Fit review | Check movement and comfort with the intended base layer and outer garment |
| Measurements to confirm | Chest, garment length, shoulder and sleeve measurements |
| Order size mix | Confirm against the approved sample and measurement sheet |
Review the intended clothing layers. Compare garment measurements, movement and closure fit on the approved sample before choosing the order size mix.
Agree an inspection checklist for the approved liner, fabric, size measurements, hem control and connector identification. Electrical operating checks must use the matched vehicle-power configuration and its documented limits. General garment-testing images are examples, not this liner’s certification or test report.
MATCH EVIDENCE TO THE CONFIGURATION
Agree an inspection checklist for the approved liner, fabric, size measurements, hem control and connector identification. Electrical operating checks must use the matched vehicle-power configuration and its documented limits. General garment-testing images are examples, not this liner’s certification or test report.
Review the method, configuration, measured result and conditions before using a performance figure in the product specification.
Share your logo artwork, preferred position and requirements for labels, hangtags, instructions and packaging. EVERLANDA coordinates sample review and the quotation scope with the selected supplier.
For a private-label enquiry, review the decoration method and position against the actual material and garment construction. Confirm feasibility and the sample result before approval.
| Decision | What to establish |
|---|---|
| Base product | Approve the garment, configuration and proposed artwork position. |
| Requested changes | Discuss logo, labels, materials, pattern or packaging. Each change requires supplier and sample review. |
| Quote and sample approval | Agree the scope, sample costs, minimum order, timing and bulk terms in writing. |
The photographs below are general garment workshop and packing references. EVERLANDA coordinates the approved sample, product specification and order requirements with the selected supplier. They do not document production or testing of this particular product.
Six views of general garment production, from fabric preparation to garment handling and the overall workflow.
Use the approved sample and written configuration as the order reference.
A look at general garment workshop facilities and equipment.
Use the itemized quotation and packing list to agree the packing details for your configuration.
Archived packing and dispatch examples from general garment orders.
Product-specific documentation reserved pending applicable evidence.
Agree a written sample approval and inspection plan with our procurement coordination team. Confirm inspection coverage, any third-party involvement and fees for the order.
Confirm the approved sample, materials, garment measurements, configuration and itemised supply list.
Record material, branding and electrical specifications; confirm any changes before production.
Review appearance, measurements, closures, seams, components and the agreed functional checks.
Check size counts, supplied power accessories, labels, instructions and packing details.
| Inspection scope | Items to agree |
|---|---|
| Garment | Compare dimensions, materials, colour, closures and finish against the approved sample. |
| Configuration and function | Check the identified components and agreed preparation or operating method, where applicable. |
| Complete order | Compare item counts, size mix, labels, instructions and packing against the written quotation. |
PRODUCT CARE
Request model-specific preparation, disconnection, cleaning, drying and storage instructions before cleaning. The source material does not establish a machine-wash method or a cleaning temperature for this liner.
Confirm the permitted care procedure and inspect the heating, control and connector condition as described in the supplied instructions.
Discuss garment, control, harness and cuff-connector identification separately so replacement requirements match the approved configuration.
It is a heated liner / mid-layer for use beneath a suitable outer garment. The available evidence does not establish armour, airbag protection or an abrasion-protection rating for the liner.
The source describes 12V vehicle power. The vehicle-side plug, input harness and electrical ratings must be confirmed for the supplied configuration; battery supply is not established.
The source describes six-zone coverage across the chest, back, sleeves and collar. The graphics illustrate the coverage and do not specify an exact heating-panel or wiring layout.
The reference has a built-in hem button and three heat levels. Confirm the button sequence and operating instructions with the approved sample.
The source identifies them as DC outputs for heated gloves. The vehicle-side input is a separate configuration item to confirm.
Their inclusion is not established by the current material. Ask for an itemised quotation confirming the liner, harness, gloves and any other components.
The reference lists XS through 3XL. Request the actual garment measurement sheet and check fit with the intended clothing layers before confirming the order.
Share the required decoration and packaging brief. The executable scope, sample approval and order terms should be confirmed in your quotation.
Tell us your intended use, approximate quantity, sample needs and proposed branding or configuration changes. Include the required size mix and target market if available.
You can begin with a sample or project enquiry even if some details are still undecided.
EVERLANDA will discuss the selected product, sample evaluation, specification and quotation scope with you. Availability, minimum order, costs and timing are confirmed for the selected order.
| Purchasing topic | What your enquiry can cover |
|---|---|
| Samples and quantities | Discuss evaluation samples, required sizes and the estimated quantity for your wholesale enquiry. |
| Timing and logistics | Agree sample and bulk timing, packing and delivery terms for the confirmed configuration. |
| Quotation scope | Identify the garment, components, artwork, instructions and packaging separately. |
Procurement Coordination & OEM / ODM Project Support
Share a few details to request a quote or sample.
Heated Motorcycle Jacket Liner · Enquiry reference SP-03
Your details are used to respond to this enquiry. Privacy Policy.
EVERLANDA · Procurement coordination & OEM / ODM support
Home / Products / About / Contact / Privacy Policy
Share a few details to request a quote or sample.
Heated Motorcycle Jacket Liner · Enquiry reference SP-03
Privacy Policy · doya.zeng@everlanda.com
We will contact you within 1 working day. You can also reach us directly at doya.zeng@everlanda.com.