PRIVATE LABEL & BULK SOURCING
This phase change cooling vest holds compatible PCM packs in a black mesh carrier. Review the visible pack-pocket layout, front zip and side straps when evaluating a sample for your workwear or branded product range.
Discuss the illustrated product, sample requirements and proposed changes. Supply scope and order terms are confirmed in your quotation.
START WITH THIS PRODUCT
Review the garment and visible construction first. Share your intended use, clothing layers, quantity and required configuration when requesting a sample.
Black mesh carrier · appearance reference
The table identifies the referenced garment and configuration. Confirm production specifications and the itemised supply scope on the approved sample.
| Review area | For this product |
|---|---|
| Product configuration | Mesh carrier with compartmented PCM cooling packs |
| Visible garment construction | Sleeveless carrier, front zipper, bound openings and side straps |
| Pack enclosure | TPU is the material listed for the referenced pack enclosure; confirm the supplied specification |
| Pack arrangement | Inner mesh pocket areas are shown in the open-inside illustration |
| Supply scope | Confirm carrier, compatible pack type, quantity and any spare packs separately |
| Sizing | Request finished carrier measurements and the fit range for the approved sample |
A phase change vest uses conditioned PCM packs held in the carrier pockets. The packs absorb heat as their material changes phase. Select the pack transition specification and evaluate cooling under the intended wearing conditions before setting a performance requirement.
Confirm the PCM material, transition specification, pack compatibility and measured cooling duration for the supplied configuration. An illustration does not establish a temperature or operating time.

PREPARATION & USE
The guide combines a general preparation principle with the visible, static pack-pocket layout. It does not replace the operating instructions for the supplied carrier and pack combination.
Specify the garment and any separate components, instructions, branding or packaging in one enquiry. Record each item and quantity in the agreed quotation.
| Item | Reference or enquiry item | Confirm in your quote |
|---|---|---|
| Mesh carrier | Front-zip carrier with side straps and pack pockets | Approve the carrier construction, measurements and quantity. |
| Compatible PCM packs | Compartmented packs referenced in the product materials | Agree material identity, transition specification, dimensions and pack count. |
| Spare packs | Additional packs for the proposed use schedule | Confirm compatible replacements and any separate cost or quantity. |
| Branding and packing | Labels, instructions, individual packaging and cartons | Approve artwork, language, supply scope and order-specific packing. |
Compare the approved sample, itemised quotation and packing list. Confirm the product version, materials, measurements and any requested accessories before order approval.
Review the mesh carrier and soft-pack enclosure as separate components. Agree the textile specification, pack construction, pocket fit and compatibility on the sample.
The illustrated black mesh carrier and its PCM pack pockets are the configuration shown here. Reflective material and a high-visibility layout have not been verified for this carrier. Review the actual base fabric, reflective components and their placement on the same sample before assessing a visibility requirement.
| Material or construction | Sample and order review |
|---|---|
| Mesh carrier | Visible mesh, bound edges, front zip and side straps; textile composition and strength require confirmation. |
| TPU pack enclosure | The source specification lists TPU for the pack enclosure. Confirm the supplied material and seal construction. |
| PCM fill | Confirm the PCM grade and transition specification with applicable product documentation. |
| Pack-pocket compatibility | Check dimensions, orientation, retention and wearing fit using the chosen carrier and packs. |
Approve the material specification, colour, sample construction and care requirements in writing. Review changes against the agreed sample before production.
The illustration shows separate sealed sections in the soft pack. Check enclosure condition, sealed edges and the agreed pack identification on the sample.
The open-inside reference shows the carrier pocket areas used to hold the packs. Verify the pocket dimensions, retention and access with the matching components.
Record the approved construction, closure operation, stitching and component checks in the sample and inspection checklist.
For proposed construction changes, agree materials, sample acceptance, quantities, costs and timing. Coordinate any care-label and packaging changes with the final specification.
No verified garment size chart is available in the supplied records. Pack dimensions are not garment measurements.
| Sizing decision | Confirm for your order |
|---|---|
| Carrier measurements | Request chest, body length, arm openings and the defined measuring method. |
| Side straps | Confirm their practical adjustment range on the approved carrier. |
| Wearing configuration | Review fit with the specified packs installed and the intended clothing layers. |
Review the intended clothing layers. Compare garment measurements, movement and closure fit on the approved sample before choosing the order size mix.
Identify the carrier, PCM material and pack specification, pack count, conditioning method, ambient conditions, clothing layers, activity and measurement method. Agree the cooling endpoint and report the result with its test conditions.
MATCH EVIDENCE TO THE CONFIGURATION
Identify the carrier, PCM material and pack specification, pack count, conditioning method, ambient conditions, clothing layers, activity and measurement method. Agree the cooling endpoint and report the result with its test conditions.
Review the method, configuration, measured result and conditions before using a performance figure in the product specification.
Share your logo artwork, preferred position and requirements for labels, hangtags, instructions and packaging. EVERLANDA coordinates sample review and the quotation scope with the selected supplier.
For a private-label enquiry, review the decoration method and position against the actual material and garment construction. Confirm feasibility and the sample result before approval.
| Decision | What to establish |
|---|---|
| Base product | Approve the garment, configuration and proposed artwork position. |
| Requested changes | Discuss logo, labels, materials, pattern or packaging. Each change requires supplier and sample review. |
| Quote and sample approval | Agree the scope, sample costs, minimum order, timing and bulk terms in writing. |
The photographs below are general garment workshop and packing references. EVERLANDA coordinates the approved sample, product specification and order requirements with the selected supplier. They do not document production or testing of this particular product.
Six views of general garment production, from fabric preparation to garment handling and the overall workflow.
Use the approved sample and written configuration as the order reference.
A look at general garment workshop facilities and equipment.
Use the itemized quotation and packing list to agree the packing details for your configuration.
Archived packing and dispatch examples from general garment orders.
Product-specific documentation reserved pending applicable evidence.
Agree a written approval and inspection plan with our procurement coordination team. Inspection coverage, third-party involvement and fees are confirmed for the order.
Confirm the approved sample, materials, garment measurements, configuration and itemised supply list.
Agree production requirements and document any changes.
Review appearance, measurements, closures, seams, components and the agreed functional checks.
Check garment quantities, colours, sizes, labels, instructions and the packing list.
| Inspection scope | Items to agree |
|---|---|
| Garment | Compare dimensions, materials, colour, closures and finish against the approved sample. |
| Configuration and function | Check the identified components and agreed preparation or operating method, where applicable. |
| Complete order | Compare item counts, size mix, labels, instructions and packing against the written quotation. |
PRODUCT CARE
Obtain the carrier and compatible-pack instructions before cleaning. The supplied records do not establish a machine-wash method, water temperature or detergent for this carrier.
Inspect the packs and carrier before reuse. Follow the approved conditioning, drying and storage instructions for the selected components; keep packs away from sharp objects and do not use damaged packs.
Identify the carrier and pack specification when requesting replacements. Agree compatible pack types, quantities, availability and support conditions for the order.
The mesh carrier holds compatible PCM packs. Conditioned PCM absorbs heat as it changes phase. The specific transition range and cooling performance must match the supplied pack specification.
Condition intact, compatible packs until fully solid and follow their supplied instructions. Confirm the exact preparation temperature and time for the chosen pack.
A verified duration is not available in the supplied records. Evaluate the agreed pack count, conditioning method, climate, clothing layers and activity before setting a duration requirement.
The carrier, compatible pack type, pack count and any spare packs must be identified separately in the itemised quotation. The illustration does not define the supplied quantity.
Request the carrier measurement sheet and strap adjustment range for the selected sample. Dimensions listed for packs should not be treated as a garment size chart.
Share artwork, label placement, quantities and packing requirements. Feasibility, sample scope, minimum quantities and pricing are confirmed with the selected supplier.
A verified machine-wash instruction is not available in the supplied material. Obtain the carrier and pack care instructions before cleaning.
Include the intended use, required carrier quantity, compatible pack specification, spare-pack needs, target market, sizing and any artwork or testing requirements.
High-visibility performance has not been established for the black mesh configuration. A reflective cooling vest request requires verification of the same carrier’s materials, reflective layout and applicable documentation. Review any decoration against that layout; the illustration does not establish a visibility class or clothing compatibility.
Tell us your intended use, approximate quantity, sample needs and proposed branding or configuration changes. Include the required size mix and target market if available.
For a hi vis cooling vest enquiry, specify the target country, applicable visibility requirements, wearer sizes, clothing layers and intended use. Identify the PCM packs and preparation arrangements required. Any proposed carrier changes, logo placement, documents, quantities and supply scope require review before quotation.
You can begin with a sample or project enquiry even if some details are still undecided.
EVERLANDA will discuss the selected product, sample evaluation, specification and quotation scope with you. Availability, minimum order, costs and timing are confirmed for the selected order.
| Purchasing topic | What your enquiry can cover |
|---|---|
| Samples and quantities | Discuss evaluation samples, required sizes and the estimated quantity for your wholesale enquiry. |
| Timing and logistics | Agree sample and bulk timing, packing and delivery terms for the confirmed configuration. |
| Quotation scope | Identify the garment, components, artwork, instructions and packaging separately. |
Procurement Coordination & OEM / ODM Project Support
Share a few details to request a quote or sample.
Mesh Phase Change Cooling Vest · Enquiry reference SP-07
Your details are used to respond to this enquiry. Privacy Policy.
EVERLANDA · Procurement coordination & OEM / ODM support
Home / Products / About / Contact / Privacy Policy
Request a quote or sample.
Mesh Phase Change Cooling Vest · Enquiry reference SP-07
Privacy Policy · doya.zeng@everlanda.com
We will contact you within 1 working day. You can also reach us directly at doya.zeng@everlanda.com.